无定向激光陀螺捷联惯组标定方法的对比研究

对三种无定向激光陀螺捷联惯组标定方法进行了对比研究,详细分析了各种方案的标定原理,提出了利用标准差作为评价标定方法优劣的指标.结合对某一激光陀螺捷联惯组标定试验结果的分析,得到了在无北向基准的情况下,三种标定方法在标定时间和标定精度两个指标上的对比结果,为无定向激光捷联惯组的标定提供了指导,具有较大的工程应用价值.     

侧载及加热方位对槽道内临界热流密度影响

为了研究侧载以及加热方位对矩形窄缝槽道内临界热流密度特性的影响,在旋转平台上进行了两相流的超重力实验.以蒸馏水为工质,通过改变质量流速、入口温度、侧载大小以及加热方位,获得了发生临界换热现象时的质量流速、实验段压降和壁温的变化趋势,考察了侧载和加热方位对临界热流密度的影响规律,并对侧载下两相流不稳定性进行了简析.实验表明:发生临界换热时,壁温迅速上升,有效加热热流开始减少,关闭加热电源后,实验段压降下降、质量流速回升较明显;侧载以及不同的加热方位对临界热流密度有明显影响;临界热流密度发生前后,蒸汽回流导致进口温度上升,增加了流动的不稳定性.      

Prediction of cutting forces in ball-end milling of 2.5D C/C composites

Machining of carbon/carbon (C/C) composite materials is difficult to carry out due to its high specific stiffness, brittleness, anisotropic, non-homogeneous and low thermal conductivity, which can result in tear, burr, poor surface quality and rapid wear of cutters. Accurate and fast pre-diction of cutting forces is important for milling C/C composite materials with high quality. This paper presents an alternative cutting force model involving the influences of the directions of fiber. Based on the calculated and experimental results, the cutting forces’ coefficients of 2.5D C/C com-posites are evaluated using multiple linear regression method. Verification experiment has been car-ried out through a group of orthogonal tests. Results indicate that the proposed model is reliable and can be used to predict the cutting forces in ball-end milling of 2.5D C/C composites.     

基于压缩量偏差约束的整体叶盘砂布轮数控抛光路径规划

数控抛光是实现整体叶盘叶片表面光整加工自动化、高效化的关键技术,而抛光路径规划对表面质量有着显著的影响。在抛光曲面时,砂布轮沿接触曲线上的径向压缩量偏差导致材料去除量一致性较差。针对该问题,提出一种基于压缩量偏差约束的路径规划方法。通过对砂布轮受曲面挤压变形几何分析,建立了自由曲面抛光接触线上砂布轮压缩变形量分布模型。在给定刀触点处,以接触曲线上最大压缩量偏差最小化为评价指标构建了刀轴矢量优化模型,并利用改进的粒子群优化（PSO）算法进行求解。基于最优刀轴矢量,完成自由曲面上等参数相邻刀触轨迹曲线的计算。最后,通过数据对比和试验,验证了所提方法的正确性和有效性。结果表明,抛光区域的轮廓度、粗糙度均得到明显的改善。     

基于永磁无刷电机磁场定向控制的平台伺服控制设计

介绍了基于永磁无刷电机(Brushless DC Motor,BLDC)和磁场定向控制(FOC)的平台伺服控制系统方案.阐述了一种基于FOC的伺服控制设计方法,描述了嵌入式系统的硬件与软件实现.通过实测对比了BLDC采用FOC方法与三相六拍法时伺服控制系统的转速波动情况,结果显示采用FOC显著提高了基于BLDC的伺服控制系统性能.     

直升机缆位系统建模与仿真

针对直升机绞车收放时缆位保持问题,建立了负载出水回收进舱阶段缆位的动力学模型。由于浮力与洋流作用突然消失,负载出水后发生摆动,将负载的摆动作为带有理想约束的质点系动力学系统,采用拉格朗日方程建立动力学模型。考虑直升机悬停提升的情况进行仿真,仿真结果表明建立的数学模型能够较好的模拟负载摆动时的缆位变化。     

Revisiting Perspective-Taking: Can People Maintain Imagined Perspectives?

Abstract

Three experiments were conducted to examine whether people can adopt and maintain imagined perspectives in the absence of target information. The task used entailed providing information about an imagined perspective in advance of target information to examine whether this would facilitate perspective-taking performance and reduce or eliminate alignment effects that are commonly reported in the literature. The three experiments employed different types of spatial environments: an environment learned from navigating a computer screen (Experiment 1), and an immersive environment that was either remote (Experiment 2) or immediate (Experiment 3) at the time of retrieval. Across the three experiments, results showed that information about an imagined perspective can be utilized ahead of target information. Furthermore, they suggested that alignment effects can be reduced as a result of processing information about perspective ahead of target information, but only when reasoning about specific nonimmediate spatial relations (Experiments 1 and 2). Results are discussed in connection with previous findings on spatial updating and the organizational structure of spatial memory.     

固体火箭的鲁棒自适应耗尽关机制导方法研究

针对固体火箭的耗尽关机制导问题,提出了一种基于闭路制导和零射程线相结合的自适应耗尽关机制导方法,该方法首先利用闭路制导技术,使待增速度快速收敛;随后基于零射程线理论,设计了对关机时间变化不敏感的零射程线能量耗散管理导引律和末速精调导引律,提高了耗尽关机方法在推力、秒耗、关机时间随机摄动条件下的鲁棒性和自适应性以及制导精度,从而拓展了耗尽关机显示制导方法的工程化应用.     

Categorical Bias in Line Angle Judgments: Sex Differences and the Use of Multiple Categories

According to the Category Adjustment (CA) model, spatial estimates (e.g., of location) involve Bayesian combination across multiple, hierarchical pieces information, each weighted by its relative certainty. Recent work, though, has shown that men and women differ in terms of their certainty regarding fine-grained and categorical information in location memory. Here we demonstrate that this reflects a more general sex difference in visuospatial processing by examining bias patterns in a line angle judgment task (JLAP-15). In addition, the data suggest that multiple, hierarchical levels of categorical information influenced spatial judgments. These results imply that the hierarchical combination outlined by the CA model extends beyond two levels, and that men and women apply differential weighting to these representations.     

Environmental reference systems for large-scale spaces

Human navigation in well-known environments is guided by stored memory representations of spatial information. In three experiments (N = 43) we investigated the role of different spatial reference systems when accessing information about familiar objects at different locations in the city in which the participants lived. Our results indicate that two independent reference systems underly the retrieval of spatial knowledge. Environmental characteristics, e.g., the streets at an intersection, determine which headings are easier to imagine at a given location and lead to differences in accessibility of spatial information (orientation-specific behavior). In addition, access to spatial information depends on the relative direction of a location with respect to the imagined heading, such that information about locations imagined in front of oneself is easier to access than about locations towards the back. This influence of an egocentric reference system was found for environmental knowledge as well as map-based knowledge. In light of these reference system effects, position-dependent models of spatial memory for large-scale environments are discussed. To account for the simultaneous effect of an environmental and an egocentric reference system, we present a 2-level model of spatial memory access.